Statewide buying desk
Surplus electrical wire and cable buying across New York.
New York generates surplus cable in two very different ways: a dense, underground, high-voltage network downstate, and heavy process, hydro and manufacturing industry upstate. Both produce lots worth reviewing properly.
- Nine buying regions
- All 62 counties
- 600 V to 345 kV
- Reels, pallets, truckloads
Send a New York lot
Statewide. The storage city and the access conditions matter as much as the cable itself.
Prefer to talk? 614-715-3047 · saleselectricalbuyers@gmail.com
01 / The state picture
Two cable economies in one state
New York does not have one surplus market. Downstate, the cable is underground, dense and old: paper-insulated lead-covered cable in duct banks, high-pressure fluid-filled pipe-type feeders at transmission voltage, network distribution cable under every avenue, and a construction market that replaces it continuously.
Upstate, the cable is industrial: hydro and nuclear generation, aluminum smelting, automotive stamping and engines, glass and ceramics, paper, chemicals, food processing and a long transmission corridor between them. Lots upstate tend to be bigger, dirtier and further apart.
Both matter here. A 345 kV pipe-type feeder section from Queens and a drum of 336.4 kcmil ACSR from a reconductor job near Watertown are the same conversation at the desk: construction, footage, condition, documentation. The difference is what a buyer can do with each.
What "surplus" actually means
Four situations produce almost every lot: a project ordered more than it used, a design changed after the cable arrived, a plant or utility decommissioned equipment, or a site was cleared. Each one produces different paperwork and a different value, which is why the first questions are always about why the cable is available.
02 / Regions
The nine buying regions
Each region has its own industry mix, freight realities and cable families. Start with the one that contains the material.
New York City & Long Island
The densest underground cable network in the country, wrapped around the country's most expensive construction market. Paper-insulated lead-covered.
Open page5 city pagesHudson Valley
A corridor of transmission lines, cement plants, hospitals, campuses and commuter-rail infrastructure — with heavy construction running the length of.
Open page5 city pagesCapital Region
Government buildings, a semiconductor fab, a legacy electrical manufacturing base and one of the state's busiest utility construction markets, all.
Open page4 city pagesNorth Country
Hydro generation, aluminum smelting, paper, a military installation and a border manufacturing corridor. Large electrical systems, long distances and.
Open page6 city pagesMohawk Valley
A river corridor of defense laboratories, copper and wire products, textile-era mill buildings and one of upstate's most active redevelopment.
Open page4 city pagesCentral New York
Syracuse's manufacturing and medical economy, Lake Ontario generation and a corridor of food, beverage and precision plants that run heavy electrical.
Open page4 city pagesFinger Lakes
Rochester's optics, imaging and machining base, plus an agricultural and food-processing economy that runs large refrigeration, pumping and process.
Open page6 city pagesSouthern Tier
Glass, ceramics, electronics, rail and engine manufacturing along the Pennsylvania border, with a research economy in Ithaca and a long utility.
Open page6 city pagesWestern New York
Heavy industry on the Niagara frontier: automotive stamping and engines, hydro generation, chemical and aluminum plants, and a large stock of legacy.
Open page03 / Priority cluster
High voltage and utility work first
Thirty-five pages on transmission conductor, substation material and the voltage classes that carry the state's bulk power. Written for the engineer or utility buyer who already knows the difference between ACSR and ACSS.
- ACSR conductor buyers in New York69 kV – 345 kV lines
- Transmission line cable buyers in New York69 kV – 345 kV lines
- Overhead conductor buyers in New YorkDistribution to 345 kV
- AAAC conductor buyers in New YorkDistribution to 138 kV
- ACSS conductor buyers in New York69 kV – 345 kV lines
- Covered overhead conductor buyers in New York15 kV – 35 kV distribution
- OPGW fiber buyers in New York69 kV – 345 kV lines
- ADSS fiber buyers in New YorkDistribution and subtransmission poles
- Substation wire and bus buyers in New York600 V control to 345 kV apparatus
- Aluminum tube bus and fitting buyers in New York69 kV to 345 kV switchyards
- Station service cable buyers in New York600 V to 15 kV auxiliary
- Transformer lead wire buyers in New York600 V to 15 kV apparatus connections
- Grounding grid conductor buyers in New YorkBare copper · station grounding
- High-voltage cable buyers in New York46 kV to 345 kV
- Subtransmission cable buyers in New York35 kV to 69 kV
- 69 kV cable buyers in New York69 kV subtransmission
- 115 kV cable buyers in New York115 kV transmission
- 138 kV cable buyers in New York138 kV transmission
04 / Questions
New York buying questions
Do you cover the whole state, including the Adirondacks and the Southern Tier?
Yes — all 62 counties. Coverage is organised into nine buying regions, and each regional page carries the local industry picture and access notes. Distance affects the minimum practical lot size, not whether a lot will be reviewed.
What is different about buying cable in New York City?
Almost everything is underground and access is the constraint. Paper-insulated lead-covered cable and high-pressure fluid-filled pipe-type cable are normal, loading windows are narrow, and a tractor-trailer often cannot stop at the kerb. Downstate lots are planned around the building, the lift and the street, not the mileage.
Can you review utility surplus without the utility being involved in the sale?
Utility surplus normally reaches the market through the utility's own disposal process, a contractor closing out a project, or a broker acting for the owner. We respond to those processes as they are run. We do not ask anyone to release material outside their own authorisation, and nothing moves until the releasing party has completed it.
Which is worth more in New York — copper or aluminum?
Per pound, copper. Per dollar of usable conductor, it depends entirely on the construction and the footage. Large aluminum transmission conductor with a drum tag can be worth more than a small coil of copper building wire, and the reverse is true for a partial reel of 500 kcmil copper feeder. Metal content is the floor, not the answer.
Do you buy from contractors, plants and warehouses as well as utilities?
Yes. Contractors, plants, mills, hospitals, universities, warehouses, demolition contractors and utility crews all produce lots. The desk reviews any quantity from a single reel upward, and the review questions are set by the construction rather than by the type of seller.
Next step
Not sure which page fits?
Send the detail anyway. A buyer will route it to the right construction and come back with the questions that matter.
Send the lot
Statewide coverage, one desk.
Prefer to talk? 614-715-3047 · saleselectricalbuyers@gmail.com